Quick Product Links
  


  QUICK LINKS



 



 
 
Hot Air Generator

Oil / Gas fired, direct type, smokeless hot air generators, Single phase, smokeless, portable, hot air upto 300º C

Hot Air Generator

Hot Air Generator With Booster Blower

Hot Air Generator,Hot Air Burner,High Velocity Burner,Radiant Recuperative Burner,Suction Burner, Penetrating, Thursting, Churning, Uniformity as per API-6A, Auto cycle control, On-Off control

Hot Air Generator,Hot Air Burner,High Velocity Burner,Radiant Recuperative Burner,Suction Burner, Penetrating, Thursting, Churning, Uniformity as per API-6A, Auto cycle control, On-Off control

|Top|

Hot Air Burner
  • Fully Automatic.

  • Fuels - Light Oils/LPG/NG

  • Very short flame length.

  • Convective heat source, complete combustion.

  • Applications: For temperature range 200 to 500º C, Ovens burnout furnaces, dehydration ovens, enamelling ovens.

Hot Air Generator,Hot Air Burner,High Velocity Burner,Radiant Recuperative Burner,Suction Burner, Penetrating, Thursting, Churning, Uniformity as per API-6A, Auto cycle control, On-Off control

|Top|

High Velocity Burner
 

Replaces Electrical Heating For Cost Saving & Quality Enhancement

  • Churning

  • Circulating

  • Thrusting

  • Penetrating

  • Pulsating

  • Driving

  • Fully Automatic.

  • Fuel  - Clean LDO/ HSD/ Kerosene/ LPG/NG

  • Complete combustion, smokeless, high velocity short flame.

  • Compatible to on/off, PID,    multi input multi output PLC controller

  • Offers excellent uniformity as per API 6 A standard.

  • Applications- All high temperature automatic furnaces, heat treatment furnaces, Pot furnaces, wire annealing etc.

 

Hot Air Generator,Hot Air Burner,High Velocity Burner,Radiant Recuperative Burner,Suction Burner, Penetrating, Thursting, Churning, Uniformity as per API-6A, Auto cycle control, On-Off control

|Top|

Indirect Recuperative Radiant Tube Oil/Gas Burner
 

Hot Air Generator,Hot Air Burner,High Velocity Burner,Radiant Recuperative Burner,Suction Burner, Penetrating, Thursting, Churning, Uniformity as per API-6A, Auto cycle control, On-Off controlCertain processes require indirect heating due to constraints such as combustion product effect, uniformity etc.

Radiant tube burners are used in such cases, however recuperation is essential to minimize the loss through flue.

Dhanaprakash innovated a " Cost Effective Radiant Recuperative Burner."

  • More than 85% efficiency.

  • Flue gas temperatures as low as 200ºC.

  • Single ended tube, u-tube, versions available.

  • Furnace temperatures upto 950ºC obtained.

  • Fuels used --- Reliance LDO, Diesel, Kerosene LPG, Natural Gas.

  • Long lasting radiant tubes  --  SS310, 410, Kanthal APM.

  • Fully automatic burner.

  • Custom designed solutions case to case basis.

  • Direct substitution for electrical heating (Retrofit).

  • Saves substantial cost.

|Top|

Suction Burner

 

For certain indirect heating, gas/oil is required to be fired in ducts / tubes and the burner has to overcome the ducts back pressure in such cases a vacuum exhauster is fitted to the other end of duct which sucks air from burner end resulting into perfect controlled combustion providing uniformly distributed heat across the duct length.

  • Fully automatic and safe

  • Highly efficient

  • Preparing post purging and facility.

  • Application : Tank Heating Space Heating Oven Heating, Drying etc.

 

 

|Top|

Back to Main Product Page

 

 
 

  

Hot Air Generator,Hot Air Burner,High Velocity Burner,Radiant Recuperative Burner,Suction Burner, Penetrating, Thursting, Churning, Uniformity as per API-6A, Auto cycle control, On-Off control