1. Automatic Burner and Recuperator.

2. Bath Temperature Control.

3. Tremendous Cost Saving in Melting and Holding.

4. Heat Losses Minimises.

5. Best Suitable For

• Pressure die casting.

• Gravity die casting.

• Low pressure die casting.

|Top|

Refractory Hearth Continuous Melting Cum Holding Furnace

• Automatic burner and recuperator.

• Bath temperature controlled.

• Tremendous cost saving in melting.

• Applications- gravity die casting, rotor die casting.

Crucible Type Melting Cum Holding Furnace

• Automatic Burner and Recuperator.

• Bath Temperature Control.

• Tremendous Cost Saving in melting and holding

• Heat Losses minimises.

Best Suitable for

• Pressure die casting.

• Gravity die casting.

• Low pressure die casting.

|Top|

• Continuous Cast Iron Bath Tub Type Crucible Furnace for Aluminum Melting Cum Holding.

• Ideal for Pressure Die Casting where Iron Allowed.

• Recuperator and Internal Heat Recovery.

• Heavy, Strong, Rugged Construction. 

• Fully Automated.

• Bath Temperature Controlled.

|Top|

• Automated oil/gas fired billet heater for Aluminium, Brass, Copper, Zinc and Lead and their alloys..

• Continuous availability of billets --- Automatic pusher.

• Uniform billet heating.

• Fuel - diesel/kerosene/super LDO.

• Smokeless controlled heat.

• Ceramic Fiber lining.

• Accurate temperature control.

• More than 40% saving compared with Electrical.

|Top|

This above heat treatment furnace is also know as

Aluminium Flash Annealing

• Smokeless, oil/gas fired, perfect combustion device.---------- an innovation from Dhanaprakash

• Outright replacement of electrical heating.

• Uniformity to the extent of ±5șC.

• Custom designed bogie hearth and drop quench furnaces available depending upon product handling.

• Existing electrical furnaces retrofitted into Oil &/or  Gas.

• Programmable temperature controlling system.

• Better properties than electrical.

• 50% cost saving compared with electrical.

• Same furnace can be used for solution treatment and ageing.

Applications :

• Aluminum casting Solutionising.

• Aluminum wire rod Solutionising.

• Aluminum conductors Solutionising.

• Aluminum circle annealing.

• Aluminum slugs annealing.

|Top|

Aluminium Crucible Pot Type Bale Out Furnace

• Silicon / Graphite Crucible for Ingot Melting.

• Totally Enclosed Furnace.

• Used for Melting & Holding also.

• Separate Vent with Recuperator.

• High Velocity Burner.

• Double Sandwich Ceramic Fibre Lining.

• Cast Iron Protection Plates at top.

• Swing out Insulated Lid.

Ideal for small size Gravity, Pressure and Low Pressure Die Casting.

|Top|

• Scrap, Ingots, Rejects are processed in Direct Type Furnace.

• Stationery / Tilting.

• Excellent Energy Efficiency.

• Top / side Firing.

• Door for Dross Removing / Gearing / Degassing.

• Melting Cost Reduced

|Top|

• Oven fitted with oil/gas fired hot air generator.

• Replaces electrical heating.

• Uniformity within ±3șC.

• 50% saving on operating cost.

|Top|

Typical Aluminium Chips contain magnetic Iron Material which sticks to chips due to Oil and Water used during machining.; Hence Chips are required to be dried to make it free from oil and moisture, which is then passed over a highly sensitive Magnet with vibrating screen.

•       Initial Fe Content  -  0-50%

•       Final Fe  Content  -  0.5%

•       Typical Batch        - 200 Kg.

•       Batch Time            - 1 - 2 Hours.

• Refractory Liner Rotary Drier.

• Fully Automatic Oil Burner Controlled.

• Vibrating Feeder for receiving and discharging of dried chips.

• Highly Sensitive magnetic Drum for separation.

• Automated System.

• Ideal for Aluminium foundry with Machine shop

• Machining Centers.

• Scrap Processors.

|Top|